198 lines
7.3 KiB
INI
198 lines
7.3 KiB
INI
# This section is mandatory. Populate all fields with accessory-specific info.
|
||
[accessory]
|
||
name=BMW RaHo
|
||
model=F20-NBTEvo-0716
|
||
manufacturer=BMW
|
||
serial=2580731
|
||
firmware_version=NBTevo_J16081A
|
||
hardware_version=D4
|
||
current_language=en
|
||
supported_languages=en,fr
|
||
|
||
# This section describes the transport to the Apple device.
|
||
[transport]
|
||
name=Lightning Connector
|
||
id=1234
|
||
|
||
# This section describes parameters for the link which will override the default values
|
||
# maxretries: max number of retries if command is not acknowledged
|
||
# retrytimeout: time to wait for an acknowledgement (ms)
|
||
[link]
|
||
retrytimeout=2000
|
||
maxoutpkts=10
|
||
maxacks=5
|
||
acktimeout=22
|
||
acktimeoutprio=30
|
||
maxpktsize=32768
|
||
|
||
# This section handles options for Application Launch.
|
||
[applaunch]
|
||
enable=yes
|
||
|
||
# This section handles options for the Bluetooth Connection Status
|
||
# mac: The mac address that is paired to the Apple device (IAP2_BT_STATUS_MAC_ADDR environment variable will be used first)
|
||
# connectstatus: The initial connection status sent to the device. This can be controlled via API after connection.
|
||
;[bluetooth]
|
||
;enable=yes
|
||
;id=1111
|
||
;name=Bluetooth
|
||
;connectstatus=enable
|
||
;mac=9C:DF:03:BF:84:9C
|
||
|
||
# This section handles options for the WiFi Connection Status
|
||
# id mandatory if enabled
|
||
# name mandatory if enabled
|
||
# SSID mandatory if enabled
|
||
# SecurityType optional accepted values are "None"/"0", "WEP"/"1", "WPA2"/"WPA2 Personal"/2
|
||
# BSSID optional It is blob in Hex
|
||
# Passphrase optional
|
||
# Channel optional
|
||
# carplay optional
|
||
[WiFi]
|
||
enable=yes
|
||
id=2222
|
||
carplay=yes
|
||
name=BMW RaHo
|
||
;BSSID=48a9d2ba070b
|
||
SSID=BMW34567 CarPlay
|
||
Passphrase=123456780
|
||
SecurityType=WPA2
|
||
Channel=11
|
||
|
||
# This section handles options for USB Device Mode audio.
|
||
# Mandatory rates: 32000,44100,48000
|
||
# Optional rates: 8000,11025,12000,16000,22050,24000
|
||
# autostart: driver will automatically request device to stream audio during initialization
|
||
;[devaudio]
|
||
;enable=yes
|
||
;rates=32000,44100,48000
|
||
;autostart=yes
|
||
|
||
# This section handles options for Media Library Sync.
|
||
# syncbufsize: Internal buffer size for sync. The driver will stop and resume if the internal buffer is full.
|
||
# syynccompletetimeout (ms): Simulate a sync complete if there has not been any media update after X ms.
|
||
# syncafterstop: Keep background sync active to allow future media library updates; published to PPS
|
||
[medialib]
|
||
enable=no
|
||
;syncbufsize=131072
|
||
;synccompletetimeout=2000
|
||
;syncafterstop=yes
|
||
|
||
# This section handles options for the NowPlaying attributes to be published to PPS.
|
||
# metadata: Track attributes to be published.
|
||
# playback: Playback state attributes to be published.
|
||
[nowplaying]
|
||
enable=yes
|
||
metadata=PersistentIdentifier,Title,PlaybackDurationInMilliseconds,AlbumTitle,AlbumTrackNumber,AlbumTrackCount,AlbumDiscNumber,AlbumDiscCount,Artist,Genre,Composer,ArtworkFileTransferIdentifier,IsLikeSupported,IsBanSupported,IsLiked,IsBanned,ChapterCount
|
||
playback=Status,ElapsedTimeInMilliseconds,QueueIndex,QueueCount,QueueChapterIndex,ShuffleMode,RepeatMode,AppName,MediaLibraryUniqueIdentifier,SetElapsedTimeAvailable,AppBundleID,iTunesRadioAd,iTunesRadioStationName,iTunesRadioStationMediaPlaylistPersistentID,Speed,QueueListAvail,QueueListTransferID
|
||
|
||
# This section handles options for Location.
|
||
# types: Types of NMEA sentences that the accessory can provide
|
||
[location]
|
||
enable=yes
|
||
name=Location
|
||
id=1234
|
||
types=GPGGA,GPRMC,PASCD
|
||
;types=GPGGA,GPRMC,GPGSV,PASCD,PAGCD,PAACD,GPHDT
|
||
|
||
# This section handles options for External Accessory Protocol.
|
||
# protocol=Application protocol string
|
||
# nativeprotocol=Native Application protocol string
|
||
# match:
|
||
# 0=The device will not attempt to find a matching app, but no button is present
|
||
# 1=The device will attempt to find a matching app but a button is present
|
||
# 2=The device will not attempt to find a matching app, but a button is present
|
||
# appmatchID: Preferred application
|
||
# maxbufsize: Buffer size for receiving data for each protocol
|
||
[eap]
|
||
enable=yes
|
||
;protocol=com.bmw.carplay,match::0
|
||
;protocol=com.qnx.echoserver,match::1
|
||
;protocol=com.qnx.eatest,match::2
|
||
;nativeprotocol=com.qnx.eatest,match::2
|
||
;appmatchID=com.qnx.EADemo
|
||
maxbufsize=32768
|
||
multisessionperprotocol=no
|
||
ppsprotocoldir=/pps/config/iap2/protocols/
|
||
|
||
|
||
# This section handles options for the Power feature.
|
||
# charge: Charge battery when connected
|
||
# current: Amount of current available for the iPod (0, 1000, 2100, 2400)
|
||
# types: Types of information to request from the device
|
||
[power]
|
||
enable=yes
|
||
provide=no
|
||
charge=no
|
||
current=0
|
||
;types=MaximumCurrentDrawnFromAccessory,DeviceBatteryWillChargeIfPowerIsPresent,AccessoryPowerMode,IsExternalChargerConnected,BatteryChargingState,BatteryChargeLevel
|
||
types=BatteryChargeLevel
|
||
|
||
# This section handles options for the Telephony feature.
|
||
[communications]
|
||
enable=yes
|
||
|
||
# This section handles options for the POI handover.
|
||
[destination]
|
||
enable=yes
|
||
|
||
# This section handles options for the Vehicle information feature.
|
||
# infoengine: Type(s) of engine - gasoline,electric,diesel,cng
|
||
# statustypes: Types of vehicle info that the accessory can provide
|
||
[vehicle]
|
||
enable=yes
|
||
displayname=BMW
|
||
mapsdisplayname=BMW Map
|
||
;siriname=Paul
|
||
status=no
|
||
infoid=3333
|
||
infoname=Vehicle Information
|
||
;infoengine=gasoline,electric,diesel,cng
|
||
;statusid=1234
|
||
;statusname=Vehicle Status
|
||
;statustypes=range,outsidetemp,rangewarn
|
||
|
||
# This section handles options custom HID interfaces.
|
||
# mediaremote: The internal driver Media Remote HID - can be customized
|
||
# component=name::<name>,function::<function value>
|
||
# nativecomponent=name::<name>,function::<function value>,interface::<USB interface number of native HID>
|
||
;[hid]
|
||
;vendorid=0x05AC
|
||
;deviceid=0x0001
|
||
;mediaremote=play,pause,next,prev,shuffle,repeat,bookspeedreg,bookspeedinc,bookspeeddec,playpause
|
||
;component=name::USB Keyboard,function::0
|
||
;component=name::Steering Wheel Media Playback Remote,function::1
|
||
;component=name::AssistiveTouch Joystick,function::2
|
||
;component=name::Standard Gamepad,function::3
|
||
;component=name::Form-Fitting Extended Gamepad,function::4
|
||
;component=name::Non Form-Fitting Extended Gamepad,function::6
|
||
;component=name::Switch Control,function::7
|
||
;nativecomponent=name::Playback Remote,function::1,interface::1
|
||
|
||
# This section handles various workarounds.
|
||
# btstatusdelay: Add a delay before sending StartBluetoothConnectionUpdates to workaround the Apple device becoming unresponsive.
|
||
;[workarounds]
|
||
;btstatusdelay=yes
|
||
|
||
# As part of Apple certification, you must demonstrate a use case for any APIs that are enabled.
|
||
# By default, they are all enabled. You should disable any APIs that you do not use by setting the desired API(s) to 'no<6E>.
|
||
#[commands]
|
||
#iap2_medialib_play_resume=yes
|
||
#iap2_medialib_play_collection=yes
|
||
#iap2_medialib_play_tracks=yes
|
||
#iap2_medialib_play_all=yes
|
||
#iap2_nowplay_set=yes
|
||
|
||
# This section handles PPS overrides for certain values in this config file.
|
||
# If you specify a pps attribute here, the driver will use it in place of the value specified in this config file.
|
||
# value=<attribute>@<path to pps object>
|
||
#[ppsoverrides]
|
||
#name=name@/pps/services/hwinfo/status
|
||
#model=model@/pps/services/hwinfo/status
|
||
#manufacturer=manufacturer@/pps/services/hwinfo/status
|
||
#serial=serial@/pps/services/hwinfo/status
|
||
#firmware_version=firmware_version@/pps/services/hwinfo/status
|
||
#hardware_version=hardware_version@/pps/services/hwinfo/status
|
||
#current_language=current_language@/pps/services/hwinfo/status
|
||
#supported_languages=supported_languages@/pps/services/hwinfo/status
|
||
#btconnectstatus=btconnectstatus@/pps/services/bluetooth/stat |