; Navigation Settings 3.1.0 ; This is the configuration file for the navigation. ; Its syntax is very similar to Windows *.ini files, i.e.: ; - Comments start with a semicolon. ; - Settings get assigned via a simple key = value assignment (see below). ; However, different from .ini files is: ; - Sections like e.g. [system] are not supported. ; - The magic comment "; Navigation Settings" ; at the file beginning serves as a magic header. ; It contains an Apache Versioning Scheme version number. ; Path on NBTEvo target: /opt/nav/eceusa/bin/navigation.ini da-cachesize = 10 ;=== RouteCalc Cache size ; Removed (ELVIS 934499) rc-hashmapsize = 6 rc-use2hermes = true rc-db-greenroute = true route-mb-allow-motorway-in-area=false ;=== RouteCalc parameters rc-costmodel-fast-fraction = 90 rc-ti-horizon = 100000 rc-preferred-overrides-blockages = false nds-routing-attribute-cache-small = 16 nds-routing-attribute-cache-large = 32768 ; --- XAC Accessors ------------------------------------------------------------------------------------------------ ; allow XAC accessors to lock 2MB of DA containers xac-accessor-cache = 2 db_xac_cacheline = 65536 ; --- Navigation Positioning ------------------------------------------------------------------------------------------------ sensorphalanx-ubx-aid-enabled = 1 sensorphalanx-ubx-aid-ignore-aop = 1 pos-gps-antenna-x=3 pos-prediction-time = 1000 pos-ignore-carpark-attribute = false gyro = extern use-raw-external-gyro = false ; NavigationPositioning: switch over to new Positioning and keep into acount the inversion of the reverse gear ;invert-reverse-signal = true drmode = simulink ; legay deactivated according to mail o AGoetz from 23.05.2011 ; drmode += legacy fs-persistence-path=/var/opt/nav/persistence fs-persistence-client-list=SensorWrapper_UbxAid onoff-hbtdnew=on ; --- Location input ----------------------------------------------------------------------------------------------- li-enable-alphanumhnr-formatstring = true li-getbestmatches-city-firstchars-number = 1 li-getbestmatches-street-firstchars-number = 1 ;Elvis 1613562 : Adress refinement for uniqueness li-refine-hnr-by-postalcode = true ; --- Route Guidance ----------------------------------------------------------------------------------------------- rg-rope-use-preview-route = true rg-rope-use-partial-route = true ; distance table for maneuver announcements rg-dr-point-position-mode = bmw rg-dr-point-adr-use-exit-number-in-anncmnt = true rg-dr-point-adr-use-into-street-name-in-anncmnt = true rg-dr-point-adr-use-onto-street-number-in-anncmnt = true ; if distance between positions of two succesive DrPoints is smaller than the actual distance + given percental value of it, ; then both positions will be melt to one position rg-dr-point-moving-phase-distance-percental-value = 0 rg-ticcco-automatic-take-over-of-full-dynamic-routes = false rg_use_phoneme = true ;IPD Guidance Use Cases rg-use-ipd-guidance = false rg-lane-guidance-mode = bmw rg-maneuver-calc-mode = bmw ; searching forwards/backwards distances by signpost calculation (dm) rg-signpost-search-forward-dist = 50000 rg-signpost-search-backward-dist = 20000 ; activate/deactivate calculation of Entry&Leave Pedestrian area maneuvers rg-use-pedestrian-guidance = na_special ;Off road Use Cases rg-use-offroad-guidance = na_special ; activates/deactivates combination of announcement for multiple maneuver rg-combine-announcement-for-multiple-maneuver = true ; shorten direction text (North,South,East,West) to first character (N,S,E,W) if true rg-abbreviated-direction-text = true ; continuous lane guidance forecast distances (dm) rg-dr-point-lane-info-forecast_0_60_kmh = 200 rg-dr-point-lane-info-forecast_61_120_kmh = 400 rg-dr-point-lane-info-forecast_121_999_kmh = 600 ; lane info points will be moved about distance for maneuver 'now' phase. ; this distance will be multiplied with this percental value rg-dr-point-moving-lane-info-point-percental-value = 100 ; activate/deactivate calculation of HOV/Express lanes maneuvers rg-use-restricted-lanes-guidance = true ; HOV on ramp rg-min-length-of-hov-lane-on-ramp = 1000 rg-min-dist-to-decision-point-of-hov-lane-on-ramp = 500 ; HOV om motorway rg-min-length-of-hov-lane-on-motorway = 20000 rg-min-dist-by-leaving-hov-lane-decision-point-on-motorway = 13000 rg-min-dist-from-leave-hov-lane-decision-point-on-motorway = 13000 ;indicates the DR point phase in which Distance to maneuver bargraph is displayed - main or now rg-display-dist2man-bargraph-in-phase = main ; enable realistic roadsign rg-display-real-sign = true ; --- RouteInfo ------------------------------------------------------------------------------------------------ ri-cost2dest-deliver-unprecise-results = true ; --- Traffic Info ----------------------------------------------------------------------------------------------- ti-test-reenable-disabled-tfp-costs = true ti-useFromTecRoadBlocksOnly = true ti-dmf = true ; --- Hybrid Navigation ------------------------------------------------------------------------------------------------- send-route-delay-in-seconds = 15 alternative-preview-calculation-timeout-in-seconds = 45 ; --- Databases ---------------------------------------------------------------------------------------------------- ; settings have been moved to nav_db.ini ; --- RouteGuidance Acoustical Advices -------------------------------------- rg_lua_script_dir = /opt/speech/data/lua rg_lua_script_prefix = bmw rg-use-phonememapping = false ;Guidedtours ;gtstorage-db = /mnt/share/nav/JDSI_DB_GT_v2.gtdb ;gtstorage-pn = MyTrip gtstorage-sizelimit = 100 gtstorage-slotlimit = 200 gtstorage-enable-duplicate-poi = true ; --- Trip memory -------------------------------------- tripmemoryctrl_countrycode_table = GER:deu:DEU += ENG:eng:GBR:USA += FRE:fra:FRA += SPA:spa:ESP += ITA:ita:ITA += DUT:nld:NLD += SWE:swe:SWE += POR:por:PRT += TUR:tur:TUR += CYT:rus:RUS += POL:pol:POL += GRE:gre:GRC += HUN:hun:HUN += CZE:ces:CZE += SLO:slk:SVK += SLV:slv:SVN += DAN:dan:DNK += NOR:nor:NOR += FIN:fin:FIN ; --- WeatherOnline ------------------------------------------------------------------------------------------------ wea-online-persistence-path = /mnt/share/nav/WeatherOnlineDataStorage.db3 wea-online-interval-request-new-data=900000 wea-online-expiry-time=900000 ; --- Personal POI ------------------------------------------------------------------------------------------------- poictrl_offboard_style = availability ; availability += preferredPartner ; preferredPartner += dcIndication ; dcIndication poictrl_offboard_style_dc = dcIndication poictrl_pos_update_interval_ext = 100 poictrl_resultlist_update_interval = 3000 poictrl_ppoi_estations_searchdb_dbfile = /mnt/share/nav/estationsSearch.db poictrl_ppoi_estations_staticdb_dbfile = /mnt/share/nav/estations.db poictrl_ppoi_estations_backendstdcatmapping = 50 ; 89 poictrl_ppoi_estations_backend_derived_attributes = dcIndication;bool;true;plugType;COMBOTYP1,COMBOTYP2,CHADEMO poictrl_awareness_assistant_categories_init_other = stop_possiblity;999;0;INCLUDE += stop_poss_subs;999;1;INCLUDE += no_charging_stations;228;0;EXCLUDE poictrl_awareness_assistant_categories_init_mcv = stop_possiblity;999;0;INCLUDE += stop_poss_subs;999;1;INCLUDE poictrl_awareness_assistant_categories_init_phev = stop_possiblity;999;0;INCLUDE += stop_poss_subs;999;1;INCLUDE ; --- Trip memory -------------------------------------- tripmemoryctrl_countrycode_table = GER:deu:DEU += ENG:eng:GBR:USA += FRE:fra:FRA += SPA:spa:ESP += ITA:ita:ITA += DUT:nld:NLD += SWE:swe:SWE += POR:por:PRT += TUR:tur:TUR += CYT:rus:RUS += POL:pol:POL += GRE:gre:GRC += HUN:hun:HUN += CZE:ces:CZE += SLO:slk:SVK += SLV:slv:SVN += DAN:dan:DNK += NOR:nor:NOR += FIN:fin:FIN ; --— Free Text Input ---------------------------------------------------------------------------------------------- fti-nvc-resolver-results = true fti-maxinactivitytimeout = 50000 fti-maxresultentries = 500 fti-nvc-enable = true fti-nvc-memlimit = 20971520 fti-maxcostpertoken = 2 fti-maxcostperentry = 6 fti-exactthreshold = 25 fti-sbcfg-lev = 100 fti-poi-sqlite-cache-size = 20 ; --- SDS -- -------------------------------------------------------------------------------------------------------- sds-spool-directory = /dev/shmem sds-data-directory = /mnt/data/nav/sds sds-max-search-num-in-db = 500 ; --- POI ---------------------------------------------------------------------------------------------------------- li-use-single-accessor-instance = true ; --- LearningNavigation ---------------------------------------------------------------------------------------------------- ; Locations of database. Must be a writable. Addition Sqlite files (e.g. journal file) are located next to databases. ; Initial auto recording state (true or false). ln-auto-record = false ln-db-trails = /mnt/share/nav/trails.sqlite ln-db-trips = /mnt/share/nav/trips.sqlite ln-db-aggregator = /mnt/share/nav/aggregator.sqlite ln-db-downloaded = /mnt/share/nav/downloaded.sqlite ln-db-trees = /mnt/share/nav/trees.sqlite ; Time in seconds when recorded driving information becomes outdated and is deleted. ln-outdated-time = 63072000 ; Maximum total file size in bytes of all databases before recorded driving information is deleted. ln-maximum-databases-size = 209715200 ; Maximum mileage in meter of each database before recorded driving information is deleted. ln-maximum-mileage = 100000000 ; Time in millisecond after system startup. ln-time-after-startup = 120000 ; To control creation of trips. True means need to create derived trips, otherwise don't create. (True in P003D and P004, false in P003B) ln-generate-trips = true ; Maximum path points number for pathmapper calculation, in case of avoiding timeout occuring. ; If ln-maximum-pathpoints-num here is less than or equal to zero, the maximum path points number is unlimited. ln-maximum-pathpoints-num = 3000 ; Maximum wait time for getting immediate result during shutdown ln-maximum-shutdown-wait = 2000 ; Database file process mode of database consistency module,1:remove,2:rename ln-process-mode = 1 ; Maximum process threshold of database consistency module ln-process-threshold = 5 ; Behavior for road network database, tell the Trip Manager what to do in case of road network database update: 1:Remap; 2:Rename; 3:Remove ln-database-update-behavior = 1 ; activate/deactivate handling demo positions, which tells Position Tracer if it should use demo position or should ignore them ln-use-demo-positions = false ; Maximum length of Trail in meter. Default is 0, which is no limitation. ln-maximum-trail-length = 0 ; Maximum recording time of Trail in seconds. Default is 0, which is no limitation. ln-maximum-trail-recording-time = 3600 ; Maximum memory size of recording trail in byte. Default is 0, which is no limitation. ln-maximum-trail-memory-size = 0 ; Time in milliseconds after start up the Trip Manager interprets default recording state ; as disable if required to store buffered recorded driving information into Trail. ; If zero (default), the Trip Manager will always interprets default as enabled. ln-set-recording-time = 0 ; Minimum number of Trips (i.e. minimum confidence level) for averaging or least square fitting attribute aggregations. ln-minimum-number-of-trips-for-aggregations = 3 ; Switches to enable or disable the operation of DestinationEstimation component (enable or disable). ln-destination-estimation = disable ; Switches to enable or disable the operation of Preferred component(enable/disable). ln-preferred-route = enable ; Switch to enable or disable the operation of AttributeAggregator component(enable/disable) ln-attribute-aggregator = disable ; Size of old buffered links for PosTracer. Position Tracer will only buffer up to a maximum of old links that will then start to discard the oldest. ln-buffer-size = 30 ; The time stamp of sensor data provided by positioning is fixed, set to the time of receiving, in the PosTracer sub component if it is true. ln-re-time-stamp-sensor = false ; Minimum distance (in m) between Road and Path for normal forward mapping. ln-pathmapper-minimum-distance-forward-mapping = 50.0 ; Minimum distance (in m) between Road and Path for mapping a path in reverse direction. ln-pathmapper-minimum-distance-reverse-mapping = 250.0 ; Used to calculate the start similarities between a route to be calculated and a recorded trip. Default: 1/1km (0.0 = not taken into account) ln-preferred-route-factor-start = 1 ; Used to calculate the destination similarities between a route to be calculated and a recorded trip. Default: 1/1km (0.0 = not taken into account) ln-preferred-route-factor-destination = 1.9 ; Used to calculate the time of day similarities between a route to be calculated and a recorded trip. Default: 1/12h (0.0 = not taken into account) ln-preferred-route-factor-time-of-day = 0 ; Used to calculate the day of week similarities between a route to be calculated and a recorded trip. Default: 1/3d (0.0 = not taken into account) ln-preferred-route-factor-day-of-week = 0 ; Time threshold in millisecond to classify a stop as destination. Default:1800(s) ln-stop-classification-time-threshold-destination = 1800000 ; Deviation from the linear interpolated map matched path of preferred route feature in meter. Default: 10.0 [m] ln-sensor-filter-tolerance-map-matched-pos-preferred-route = 10.0 ; Deviation from the linear interpolated map matched path of manual recording in meter. Default: 5.0 [m] ln-sensor-filter-tolerance-map-matched-pos-manual-recording = -1.0 ; Deviation from the linear interpolated dead reckoning path in meter. Default: 2.0 [m] ln-sensor-filter-tolerance-dead-reckoning-pos = 2.0 ; Deviation from the linear interpolated slope in percent. Default: 0.2 [%] ln-sensor-filter-tolerance-slope = 0.2 ; The minimum deviation from the linear interpolated curvature in 1/meter. Default: 0.005 [1/m] ln-sensor-filter-tolerance-minimum-curvature = 0.005 ; Deviation from the linear interpolated curvature as a ration from a measured curvature (1/ratio) Default:3.0 ln-sensor-filter-tolerance-curvature-ratio = 3.0 ; Deviation from the linear interpolated speed in meter/second. Default: 0.5 [m/s] ln-sensor-filter-tolerance-speed = 0.5 ; Deviation from the linear interpolated altitude in meter. Default: 1.0 [m] ln-sensor-filter-tolerance-altitude = 1.0 ; Filtering of 3D Geoid Space Polar Position. Default: 10.0 [m] ln-sensor-filter-tolerance-PositionLla = 10.0 ; Switches to enable or disable dateTime (true or false). ln-sensor-filter-tolerance-DateTime = true ; Switches to enable or disable guidance (true or false). ln-sensor-filter-tolerance-Guidance = true ; Switches to enable or disable deviation (true or false). ln-sensor-filter-tolerance-Deviation = false ; Switches to enable or disable speedLimit sign (true or false). ln-sensor-filter-tolerance-SpeedLimitSign = true ; Switches to enable or disable passingRestriction sign (true or false). ln-sensor-filter-tolerance-PassingRestrictionSign = true ; Switches to enable or disable derestriction sign (true or false). ln-sensor-filter-tolerance-DerestrictionSign = true ; Switches to enable or disable stop sign (true or false). ln-sensor-filter-tolerance-StopSign = true ; Switches to enable or disable yield sign (true or false). ln-sensor-filter-tolerance-YieldSign = true ; Switches to enable or disable town sign (true or false). ln-sensor-filter-tolerance-TownSign = true ; Switches to enable or disable motorway sign (true or false). ln-sensor-filter-tolerance-MotorwaySign = true ; Switches to enable or disable motor road sign (true or false). ln-sensor-filter-tolerance-MotorRoadSign = true ; Switches to enable or disable priority road sign (true or false). ln-sensor-filter-tolerance-PriorityRoadSign = true ; Switches to enable or disable environmental zone sign (true or false). ln-sensor-filter-tolerance-EnvironmentalZoneSign = true ; Switches to enable or disable residential area sign (true or false). ln-sensor-filter-tolerance-ResidentialAreaSign = true ; Switches to enable or disable beginReference (true or false). ln-sensor-filter-tolerance-BeginReference = true ; Switches to enable or disable intermediateReference (true or false). ln-sensor-filter-tolerance-IntermediateReference = true ; Switches to enable or disable endReference (true or false). ln-sensor-filter-tolerance-EndReference = true ; Switches to enable or disable oppositeOneway (true or false). ln-sensor-filter-tolerance-OppositeOneway = true ; Switches to enable or disable roadClass (true or false). ln-sensor-filter-tolerance-RoadClass = true ; Switches to enable or disable BMW ADAS street type (true or false). ln-sensor-filter-tolerance-BmwAdasStreetType = true ; Switches to enable or disable country code (true or false). ln-sensor-filter-tolerance-CountryCode = true ; Switches to enable or disable position state (true or false). ln-sensor-filter-tolerance-PositionState = true ; Switches to enable or disable reference position (used to locate traffic signs) (true or false). ln-sensor-filter-tolerance-ReferencePosition = false ; Switches to enable or disable GeneralWithDrawal traffic sign type (true or false). ln-sensor-filter-tolerance-GeneralWithDrawal = true ; Switches to enable or disable WithDrawalSpeedLimit2Digits traffic sign type (true or false). ln-sensor-filter-tolerance-WithDrawalSpeedLimit2Digits = true ; Switches to enable or disable WithDrawalSpeedLimit3Digits traffic sign type (true or false). ln-sensor-filter-tolerance-WithDrawalSpeedLimit3Digits = true ; Switches to enable or disable MandatoryPassingLeft traffic sign type (true or false). ln-sensor-filter-tolerance-MandatoryPassingLeft = true ; Switches to enable or disable MandatoryPassingRight traffic sign type (true or false). ln-sensor-filter-tolerance-MandatoryPassingRight = true ; Switches to enable or disable MandatoryPassingStraight traffic sign type (true or false). ln-sensor-filter-tolerance-MandatoryPassingStraight = true ; Switches to enable or disable RoundaboutSign traffic sign type (true or false). ln-sensor-filter-tolerance-RoundaboutSign = true ; Switches to enable or disable NoEntry traffic sign type (true or false). ln-sensor-filter-tolerance-NoEntry = true ; Switches to enable or disable VehiclesProhibited traffic sign type (true or false). ln-sensor-filter-tolerance-VehiclesProhibited = true ; Switches to enable or disable MotorwayEndOf traffic sign type (true or false). ln-sensor-filter-tolerance-MotorwayEndOf = true ; Switches to enable or disable ExpresswayStartOf traffic sign type (true or false). ln-sensor-filter-tolerance-ExpresswayStartOf = true ; Switches to enable or disable ExpresswayEndOf traffic sign type (true or false). ln-sensor-filter-tolerance-ExpresswayEndOf = true ; Switches to enable or disable TrafficCalmingZoneStartOf traffic sign type (true or false). ln-sensor-filter-tolerance-TrafficCalmingZoneStartOf = true ; Switches to enable or disable TrafficCalmingZoneEndOf traffic sign type (true or false). ln-sensor-filter-tolerance-TrafficCalmingZoneEndOf = true ; Switches to enable or disable GiveWay traffic sign type (true or false). ln-sensor-filter-tolerance-GiveWay = true ; Switches to enable or disable PriorityRoadEndOf traffic sign type (true or false). ln-sensor-filter-tolerance-PriorityRoadEndOf = true ; Switches to enable or disable BendLeft traffic sign type (true or false). ln-sensor-filter-tolerance-DS-BendLeft = true ; Switches to enable or disable BendRight traffic sign type (true or false). ln-sensor-filter-tolerance-DS-BendRight = true ; Switches to enable or disable DS_DoubleBendLeftFirst traffic sign type (true or false). ln-sensor-filter-tolerance-DS-DoubleBendLeftFirst = true ; Switches to enable or disable DS_DoubleBendRightFirst traffic sign type (true or false). ln-sensor-filter-tolerance-DS-DoubleBendRightFirst = true ; Switches to enable or disable DS_RoadNarrowBothSides traffic sign type (true or false). ln-sensor-filter-tolerance-DS-RoadNarrowBothSides = true ; Switches to enable or disable DS_RoadNarrowLeftSide traffic sign type (true or false). ln-sensor-filter-tolerance-DS-RoadNarrowLeftSide = true ; Switches to enable or disable DS_RoadNarrowRightSide traffic sign type (true or false). ln-sensor-filter-tolerance-DS-RoadNarrowRightSide = true ; Switches to enable or disable DS_CrossRoad traffic sign type (true or false). ln-sensor-filter-tolerance-DS-CrossRoad = true ; Switches to enable or disable DS_CrossRoadSmallRoad traffic sign type (true or false). ln-sensor-filter-tolerance-DS-CrossRoadSmallRoad = true ; Switches to enable or disable DS_RoadFromLeftDegree traffic sign type (true or false). ln-sensor-filter-tolerance-DS-RoadFromLeftDegree = true ; Switches to enable or disable DS_RoadFromRightDegree traffic sign type (true or false). ln-sensor-filter-tolerance-DS-RoadFromRightDegree = true ; Switches to enable or disable DS_OneBump traffic sign type (true or false). ln-sensor-filter-tolerance-DS-OneBump = true ; Switches to enable or disable DS_TwoBump traffic sign type (true or false). ln-sensor-filter-tolerance-DS-TwoBump = true ; Switches to enable or disable DS_Concave traffic sign type (true or false). ln-sensor-filter-tolerance-DS-Concave = true ; Switches to enable or disable DS_TrafficJam traffic sign type (true or false). ln-sensor-filter-tolerance-DS-TrafficJam = true ; Switches to enable or disable DS_RoadWorks traffic sign type (true or false). ln-sensor-filter-tolerance-DS-RoadWorks = true ; Switches to enable or disable DS_RightDownwards traffic sign type (true or false). ln-sensor-filter-tolerance-DS-RightDownwards = true ; Switches to enable or disable DS_RightUpwards traffic sign type (true or false). ln-sensor-filter-tolerance-DS-RightUpwards = true ; Switches to enable or disable DS_TrafficLight traffic sign type (true or false). ln-sensor-filter-tolerance-DS-TrafficLight = true ; Switches to enable or disable DS_AnimalCrossing traffic sign type (true or false). ln-sensor-filter-tolerance-DS-AnimalCrossing = true ; Switches to enable or disable DS_Children traffic sign type (true or false). ln-sensor-filter-tolerance-DS-Children = true ; Switches to enable or disable DS_Snow traffic sign type (true or false). ln-sensor-filter-tolerance-DS-Snow = true ; Switches to enable or disable DS-SplipperyRoad traffic sign type (true or false). ln-sensor-filter-tolerance-DS-SplipperyRoad = true ; Switches to enable or disable DS_GiveWayRoundabout traffic sign type (true or false). ln-sensor-filter-tolerance-DS-GiveWayRoundabout = true ; Switches to enable or disable DS_WindFromSide traffic sign type (true or false). ln-sensor-filter-tolerance-DS-WindFromSide = true ; Switches to enable or disable DS_PedestrianCrossing traffic sign type (true or false). ln-sensor-filter-tolerance-DS-PedestrianCrossing = true ; Switches to enable or disable DS_BycicleCrossing traffic sign type (true or false). ln-sensor-filter-tolerance-DS-BycicleCrossing = true ; Switches to enable or disable DS_TrainCrossWithoutBarrier traffic sign type (true or false). ln-sensor-filter-tolerance-DS-TrainCrossWithoutBarrier = true ; Switches to enable or disable DS_TrainCrossWithBarrier traffic sign type (true or false). ln-sensor-filter-tolerance-DS-TrainCrossWithBarrier = true ; Switches to enable or disable DS_Gravel traffic sign type (true or false). ln-sensor-filter-tolerance-DS-Gravel = true ; Switches to enable or disable DS_TwoWayTraffic traffic sign type (true or false). ln-sensor-filter-tolerance-DS-TwoWayTraffic = true ; Switches to enable or disable CityLimitStartOf traffic sign type (true or false). ln-sensor-filter-tolerance-CityLimitStartOf = true ; Switches to enable or disable CityLimitEndOf traffic sign type (true or false). ln-sensor-filter-tolerance-CityLimitEndOf = true ; Switches to enable or disable CityLimitStartEndOf traffic sign type (true or false). ln-sensor-filter-tolerance-CityLimitStartEndOf = true ; Switches to enable or disable EnvironmentalZoneEndOf traffic sign type (true or false). ln-sensor-filter-tolerance-EnvironmentalZoneEndOf = true ; Switches to enable or disable unknow traffic sign type (true or false). ln-sensor-filter-tolerance-Unknown = true ; Scale of cost factor to calculate the cost factor for perfer route. Default: 0.6 ln-preferred-route-scale-cost-factor = 0.6 ; Factor similarity to calculate the cost factor for prefer route. Default: 0.2 ln-preferred-route-factor-similarity = 0.2 ; Minimum cost factor to limit the cost factor not less than it for prefer route. Default: 0.4 ln-preferred-route-minimum-cost-factor = 0.4 ln-adas-send-vin = false ; --- Curve Indication --------------------------------------------------------------------------------------------- ci-preview-length = 1500 ci-curve-threshold-a = 7.5 ci-curve-threshold-b = 1.9 ci-curve-threshold-c = 7.5 ci-steering-effect-threshold = 15 ci-radius-straight-threshold = 8000 ci-indication-update-cycletime = 100 ci-steering-velocity-threshold = 0.75 ci-minimal-change-angle-threshold = 12.0 ci-steering-angle-hysteresis = 5.0 ci-roadclass-speed-threshold = 30 ci-turning-threshold = 60 ; --- MapViewer ---------------------------------------------------------------------------------------------------- ; subpixel jittering for label occlusion (as of #1641086, 29.06.2015) map_labeling_occlusion_history_frames = 31 mv-zorder-mode = 2 map_landuse_texture_format = 565 ;memory cache size in bytes map_scenegraph_cache_bytes = 314572800 map_vram_size = 377487360 ; vertex & index chunk size 1Mb by default map_vram_vertex_chunk_size = 1048576 map_vram_index_chunk_size = 1048576 map_3dobj_blob_cache_bytes = 20971520 map_3dobj_subimage_cache_bytes = 102400 ;map_3dobj_texture_cache_bytes = 100000 ;switch on with Anaconda 2.7 ;map_textured_citymodel = 1 ; Determines whether to create outlines map_generate_outlines = true map_width=1440 map_height=540 use-old-route-matching = false ; Option for Double-label map_double_manouver = true ; --- GuidanceViewer ---------------------------------------------------------------------------------------------------- gv_jv_use_camera_modifier = false gv_jv_lane_number_fallback = true gv_use_new_lane_opening = true gv_project = 1 gv_jv_exitLane_camera_correction_factor = 1.0 gv-dbg-iz-file-max-size = 0 gv_maneuver_buffer_size = 5 gv_max_command_output_vertices = 400 gv-style-changing-duration = 0 rg-abbreviated-direction-text = true gv_abbreviate_street_names = true db-abr = /mnt/data/nav/misc/Abkuerzungen.csv ; --- FastFill ---------------------------------------------------------------------------------------------------- ; max file size in MB ;da-persistency-filesize = 10 ; max container size in kB ;da-persistency-containersize = 128 ; path for fastfill files ;da-persistency-path = /mnt/share/nav ; used provider ;da-persistency-provider = NdsProvider ; += ClassicDbProvider ; use only some DB's in classic ;da-persistency-classic = XAC ; += GDB ; += LIT ;--- agorac setting------------------------------------------------------------------------------------------------------- agorac-encoder-maxroutelength = 1000000 agorac-decoder-maxroutelength = 1000000 agorac-max-routingpoint-distance = 0 ; --- MS switch ---------------------------------------------------------------------------------------------------- da-category-blacklist = PoiRoute += NdsDtmE ; use builtin LMT configurations (LWitte: keep this until delivery via classic DB exists db-lmt = += ; --- Diagnosis ----------------------------------------------------------------------------------------------------- ; Path to the dump files directory ; diagnosis-dumps-directory = /var/dumps ; Keys of the dump functions to be executed when performDiagnosis callback is called ; diagnosis-dump-keys = kml ; += plt ; += pltRoutes ; += screenshot ;--- adas setting------------------------------------------------------------------------------------------------------- ; Enable or disable ADAS VFW (true or false). adas-vfw-active = true ;-- parking settings --------------------------------------------------------------------------------------------------- ; Enable or disable ServiceAvailability on Area Basis (true or false) ipark-service-availability-area-basis = false ; Defines the Radius in a City with Service Available where Request Download should be started [m] ipark-service-availability-incity-radius = 30000 ; Defines the Radius outside a City with Service Available where Request Download should be stopped [m] ipark-service-availability-outcity-radius = 35000 ; Enable or disable transfer of Data Bucket "1" to MapViewer (true or false) ipark-bucket-one-visibility = false ;--- live layer -------------------------------------------------------------------------------------------------------- ;Disable all Live Layer features by default: enable-live-layer-feature = true ;Enable Live Layer poi accessor by default: use-new-poi-map-viewer-accessor = true ;Disable Speed Limts Debug page by default: map-enable-speed-limit = false